Go BottomB2400 front drive slips
 | orangetoy
Join Date: Feb 2006 Posts: 4 Michigan 
|
2006-02-16 124680
I have a kubota B2400 and when under a moderate load the front drive slips and makes a noise like a spline or gear is not engaging properly. When load is removed it engages and begins pulling again... Any idea of the problem and/or scope of repair needed?
Reply to |
Quote Reply |
Add PhotoB2400 front drive slips
| B2400
Join Date: Posts: 1
|
2006-02-21 124924
Orangetoy
I have had a B-2400 for 11 years now and the only thing I can relate your problem to is your 4 wheel drive may not be fully engaged. I had similar(but not exactly) results one time and found out my 4 wheel drive had moved out a little. I always leave mine in.
Just a thought.
doc ....
Reply to |
Quote Reply |
Add PhotoB2400 front drive slips
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York 
 Pics
|
2006-02-25 125109
There are no slip clutches used on many of the compacts yours included! Many of the larger ag style tractors do have slip clutches to absorb shock load as well as over load to the drive train. I'd locate the noises location and we can more then likely help solve the problem. Does your tractor have bi-speed turn? ....
Reply to |
Quote Reply |
Add PhotoB2400 front drive slips
| orangetoy
Join Date: Feb 2006 Posts: 4 Michigan
|
2006-02-27 125280
Yes it does have the bi-speed turn option...and it seems to work fine.....the 4wd does not make any noise or vibration other that when it slips under the heavy load. ....
Reply to |
Quote Reply |
Add PhotoB2400 front drive slips
| vibeguy
Join Date: Dec 2006 Posts: 0 Bristol, TN
|
2006-03-23 126569
I have a B2400 and noticed the same slip under load, and upon thoroughly cleaning the transfer case connection area, discovered a crack in the housing, then I immediately removed the complete front end, cleaned it more to show any more defects, discovered I was lucky enough to not have broke or worn the gears, repaired the broken housing with the aid of a buffer,grinder,& mig, reassembled, refilled with lube and tested with more rugged KABOTA typical usage, that was 2 years ago,,,, and my Bota is still performing as it should.
Hope this helps.
....
Reply to |
Quote Reply |
Add PhotoB2400 front drive slips
| orangetoy
Join Date: Feb 2006 Posts: 4 Michigan
|
2006-03-26 126693
I assume you are refering to where the drive tube connects to the trans, i will check for any cracks. Thanks for your input on this problem. I love my 2400, it is a great machine. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This